The production of precision parts is like a meticulous work of art, and there are five key steps that need to be strictly followed. First of all, in the design process, engineers use professional software to accurately outline the three-dimensional model according to the functional requirements and usage scenarios of the parts, and plan the dimensions and tolerances of each place in detail to ensure the scientificity and feasibility of the design.
1. Process planning of aluminum alloy products
Including the geometry of the product, the limit precision and its appearance regulations, the corresponding discussion, to minimize the unnecessary complexity in the mold production.
2.The overall planning of mold design
A set of high-quality abrasives not only requires a good processing equipment and skilled mold production workers, but also a very important factor is to have a good overall planning of abrasives, especially about messy abrasives, the overall planning of abrasives accounts for more than 80% of the quality of abrasives. An excellent abrasive tool plan is: under the premise of meeting customer regulations, the processing cost is low, the processing difficulty coefficient is small, and the processing time is short.
3. Determine the abrasive tool information and select the standard parts
In addition to understanding the precision and quality of new products, it is necessary to select abrasive materials appropriately by integrating the practical skills of the mold manufacturer's processing and heat treatment processes.
4.Parts processing and abrasive assembly
In addition to giving the most ideal structure and scientific and reasonable public service cooperation in the design, the precision of the mold is very important. Therefore, the selection of machining precision and processing method occupies a certain dominance in mold production.
5. Specimens
From the overall planning to the completion of the assembly, a set of abrasives is only 70%~80% of the process of ownership. Many issues related to the errors and omissions in the reduction of orders and the inconsistency of practice reduction, whether the mold is smooth, what is the refrigeration efficiency, especially the influence of the limit, position, and appearance of the glue inlet on the accuracy and appearance of the product, etc., must be checked by the test piece
